Deine Einstellungen beziehen sich jetzt auf das P3D Menü oder doch schon der Inspector?
Wie gesagt, wenn ich im Menü bin ist es egal welche Einstellung ich verändere - sichtbarer unterschied findet leider nicht wirklich statt.
Ich nehme (leider) an, an der 2.5 hat sich in diesem Bereich nichts geändert?
Hallo Zusammen :).
An anderer Stelle ja schon angekündigt:
Ich probiere es nun auch mal mit dem "Neuen"...allerdings: die ersten Ergebnisse lassen mich ein bisschen ratlos.
Folgendes bezieht sich immer noch auf die 2.4 Version.
Im ersten Anlauf habe ich @overflow Anweisungen gefolgt (Nochmals großen Respekt für die Arbeit und Hilfe, die man bei dir findet.). Sprich: Einstellung im Controlcenter sowie im P3D Menü. Allerdings war das Ergebnis mehr als...naja... Gehe ich zwei bis drei Zoom Stufen zurück, sieht es aus wie "Sau". Nun ist es egal welche Einstellungen ich im Menü vornehme: Das Ergebnis ändert sich überhaupt nicht.Dann kurz im Forum gesucht und auf den Thread gestoßen: Starkes Flimmern bei Prepar3D 2.3.
Also Inspector Einstellung angepasst und zack, AA so wie gewünscht - allerdings keine Chance wenn Wolken im Sichtfeld waren. Da droppen die Frames auf 10-18 fps. (Sah dann allerdings schon echt schick aus :P).Ich dachte bis dato, der Inspector wird überflüssig oder gibt es noch ein Trick?
Ich betreibe einen Xeon E3-1230 V2 @ 3,30GHz und die GTX660 mit 347.52. Darf ich davon ausgehen, dass ich meine GraKa wohl aufstocken muss, damit ich ansatzweise gutes AA erhalte und die Frames i.O. sind? 
Also kann ich aktuell davon ausgehen, dass die meisten AddOn's vorläufig nicht "nativ" laufen werden :(?
Super :)! Danke dir.
Hallo zusammen,
heute habe ich es auch gewagt: P3D ist installiert und die Dash brummt! Nun habe ich folgendes Problem,man möge es mir verzeihen, wenn es irgendwo schon angesprochen wurde:
Folgendes war Installiert: MA Düsseldorf.
[08FEB15] P3D Pricing Policy - Some facts on this issue...
Captains,
There is quite a bit of misinformation floating around, so if I may please, allow me to correct a few facts. (I am not trying to change anyone's opinion here- but at least be mad at PMDG for factual reasons and not something someone made up. B) ) We occasionally see these moments where a bunch of folks will run off half-cocked with information that they don't even realize is bogus... So let me set some facts out to make sure we are all at least well informed.
When we announced development for P3D 18 months ago, we were very candid about the fact that our P3D products will be significantly more expensive than our FSX products. This is true because we envision P3D as the home for our enterprise and professional products, in keeping with P3D's place in the enterprise market. P3D is a growing, in-development platform that will be constantly changing and evolving to meet the needs of the professional simulation market. With this in mind, it is thus not sufficient for PMDG to finish a product and simply toss it to the marketplace forever. We will need to invest developer time and effort to continually adapt our P3D products to version changes, as well as adding new features as they come available in P3D. This is a different approach than we use in FSX, and it is a different approach
than is used by most other developers whose products are targeted to the entertainment market only. Use of developer time is an opportunity cost, and we must carefully weigh the value of placing a developer on one project as opposed to another. These are economic considerations that must be dealt with because we envision our P3D product line as a constantly evolving, growing, professional development environment. P3D is a professional tool targeted to professional and academic users and our P3D business model moves us in that direction.
Some have expressed concern about forward compatibility with LM version changes. We have already indicated that our current product licensing will carry you through at least v3.x and x64bit conversion, which we anticipate taking place in v3.x... based on publicly available information.) I am unable to predict what will happen beyond this, but at that point we are likely a good 2 years out and we will evaluate what is fair for the marketplace at that time.
Our enterprise and professional products on P3D will have significantly higher license costs ($1,800-$25,000+ based upon what is required) and our enterprise product line will also require the purchase of an annual maintenance contract. This pricing is directly in line with the professional and enterprise software market and deals with the larger issues of certification cost, intellectual property licensing and liability mitigation. Our intial plan for P3D included only these market sectors, but we recognize that there are many non-professional users interested in our products who are using P3D and thus we created a license/pricing bracket to meet the needs of those individuals without dilluting our professional and enterprise market.Some folks have been upset because they felt that we owed them a discount for purchasing the FSX version. While we can all appreciate that desire for a healthy discount, i should point out that the promotional pricing being offered right now **is** a significant discount from the base list price that will go into effect on 08MAR15. We felt that setting the price to match that paid by FSX users was the most fair way to approach the issue.
Apparently there are some folks who are upset that we should have given a very steep discount- and again- we can appreciate the desire for healthy price savings, but there really is no precedent for it in PMDG's market history. We did not offer a discount for NGX customers who had owned our previous 737 in FS9, for example, and again P3D is an entirely and completely different platform with an entirely different purpose. Some may recall that in 2007 we offered a very short, two week promotional pricing method (almost identical to the one currently being offered, by the way!) for customers who wished to upgrade from our FS9 747 to the FSX 747, but that program had a specific purpose, was unpopular and created very many problems for customers.
To give a different example: Some of you know, Ryan got me hooked on the Battlefield franchise as a way to blow off steam with some of the members of our team. I own Battlefield 4 on the PC... I also own it on the Xbox... I was not offered any promotional pricing even though I own both platforms. This is the reality of the software licensing marketplace. I know some people wish it were otherwise- but at PMDG we live within the reality of it all...
PMDG has always been on the high end of pricing in our marketplace, and we have always required individuals to purchase a new license when moving to a new platform. While some felt that a discount was "owed" and have since accused us of "treating our customers badly" the reality is that we have always provided top tier products, complete-and-unhobbled products that do not require you to cherry pick functionality, and we have always provided continual, live support while also engaging with our customers directly and honestly in our forum. I checked our support system today, and for 2014 our average reply-to time for customers requesting support was < 4:15. We have three employees who's job it is to support customers directly and they do so on issues ranging from Windows to hardware, to FSX, to P3D and all of that is on top of providing support for our own products. In addition to customer support, we strongly support the growth and completeness of our products with multiple free updates, hundreds and sometimes thousands of fixes, corrections and improvements because we care very much to deliver our customers the finest, no-excuses simulation available on the marketplace- and to that end I feel strongly that we succeed in this endeavor.
Speaking of our forum- we have had a number of folks come to the forum to vent their disappointment. We have always allowed this in our forum and we continue to do so. We do set some ground rules, however- and those ground rules have been in place since our first software product release in 1999. We don't allow anyone to be unkind, we don't allow anyone to spread falsehoods, we don't allow anyone to be abusive and we don't allow anyone to troll.
Anyone who comes to the forum or our facebook page who wants to engage other simmers and/or us in factual, calm, respectful conversation is always welcome- even if we don't agree with you and even if your opinion is different than ours. We cannot allow folks who simply wish to vent anger or troll/incite arguments to participate freely however as this diminishes the value of the forum for all others.
In short- I am sorry if our policies on pricing do not make everyone happy. We have communicated them to you candidly for 18+ months- and we will continue to do so. We continue to work on many great things for the simming community in FSX, P3D and Xplane- and we look forward to delivering these things to you!
I hope that helps with the understanding. I'm sorry if some individuals feel that we have not done enough to support them, but we have always appreciated your support- and continue to do so- even if we don't all agree.
Mein Highlight:
Our intial plan for P3D included only these market sectors, but we recognize that there are many non-professional users interested in our products who are using P3D and thus we created a license/pricing bracket to meet the needs of those individuals without dilluting our professional and enterprise market.
Genau....Überraschung!
Wenn ich einmal gegoogelt habe, bin ich noch lange kein Journalist.
Robert, mir ist das schon bewusst aber manchmal geht es einfach nur um das "wie" :).
Ich könnte ihm noch LGW, Air Baltic und Lion Air empfehlen, würde super in sein bisheriges CV passen.
Manchmal Frage mich, in welcher Person du eigentlich da schreibst.
Der 50-jähriger Typ mit langjähriger Berufserfahrung in der Airlinebranche oder doch nur Robert, der seine Informationen auch nur über Hörensagen erhält? 
Eine Besserung gegenüber FSX erkennbar?
Ich glaube, ich habe schon mal gefragt aber gibt es eigentlich das extreme Headmovement bei großen Fliegern wie im FSX noch im P3D?
Ist ja gut...hab ich nicht gelesen. Nach dem Preis hatte ich Tränen in den Augen....hat meine Sehstärke beeinflusst.
Spass....aber was anderes: Wie siehts denn bei der 747 dann aus? Muss man sich dann auch zwischen P3D und FSX zum Vollpreis entscheiden? Dann werden ja wohl viele auf P3D umsteigen...Rando Randazzi wären doch dann besser beholfen, wenn man dann noch 30 Euro pro User drauf legt und ich ne komplett Version erhalte.
Zumal man, denke ich, als Bestandskunde ruhig hinterfragen darf, warum man noch einmal den doppelten Preis bezahlen "muss" und man nicht auf ein Upgrade Preis gesetzt hat.
Wer weiß was passiert, wenn die x64 Version für den P3D raus kommt..
DUS-CPH
Immer noch Static @Lucky Luke.
In CPH erwartet uns WInd aus 300 mit 30 Gusting 48. Prepare Dash for Paragliding.
Und Outside Check..in einer halben Stunde gehts zurück. Diesmal mit über 100 Knoten Rückenwind...geht dann ne halbe Stunde schneller.
Halllo....könnnt ihr mal dankbar sein???????!?!?!?!?!?1eieeisneinsens! PMDG hat uns einen ordentlichen Rabatt geschenkt! Das finde ich sehr gnädig und voll nett vom Randa! Undankbarer Haufen.
Ne, der kommt von Aerosoft.. Der ist static.
Mit AI? Anti Ice?
