Beiträge von callsign1065
-
-
ZitatAlles anzeigen
Hello PMDG 777 Captains!
Last night we released another Service Pack for the 777 fleet. This
update addresses some items that surfaced with the original SP1 update,
and addresses some other various cleanup items that we wanted to tend to
in the near term with the 777.This update brings some further
refinements to the Autopilot Flight Director System, the Flight
Management System, the Flight Control System, some changes to various
other items that we felt might benefit from a bit of polish. It also
brings further optimizations to the way in which the 777 uses
information from the simulator in order to make it a bit more "bullet
proof" against interference from outside applications.One of the
key pieces (in fact- the primary force behind this update) was the fix
to the "airplane wanders aimlessly during time accelerated flight"
problem that we introduced with the release of SP1. This item took a
monumental effort to resolve- and involved feedback from probably close
to 100 of our customers via this forum and via technical support. I
want to make it a specific point to thank all of you for your feedback
and for your patience while we searched for something that really and
truly defied logic. Many of you allowed us to install instrumented
files onto your sim rigs so that we could collect data- and it was this
cooperation that helped us find and kill this problem.So: Thank you!
Okay- so installation instructions are quite simple:
AUTOMATIC UPDATE VIA THE OPERATIONS CENTER:
===========================================
1) Launch the PMDG OPERATIONS CENTER. (Start/Programs/PMDG Simulations/PMDG Operations Center...)
2) Click the "Please Select a Product" tab and choose the PMDG 777.
3) In the menu tree, click VERSION.
4) Click on the "Download Update" icon for the 200LR/F and the 300ER (if you have that product installed)
5) It will take a few moments to download the update installer to your machine.
6) When the download is complete, double click the download icon and
you will be presented with the contents of the downloaded ZIP file.
Double click the update file you see there, and it will do the rest for
you!7) After the updates are completed, be sure to click on the
wheel/message at the top of the OC and allow it to repair your
aircraft.cfg livery entries.MANUAL INSTALLATION VIA DOWNLOAD:
=================================
1) A bit later tonight we will make the SP1C installers available via our downloads page on the website.
2) Download the update files, but don't run them yet!
3) While your files are downloading, run the PMDG OPERATIONS CENTER.
This will allow the OC to create a current backup snapshot of your
installed liveries and it will save you some heartache later if you have
your own liveries installed that were done by hand.4) Close the Operations Center, then run the SP1C update installers. (Or just the one if you only have the 200LR/F installed)
5) After you have completed the updates, run the PMDG OPERATIONS CENTER
again, and follow the messages at the top to re-apply all of your
liveries.
We hope you have an enjoyable weekend of 777 flying coming up!On a slightly different note- but sure to check in with the forum
during the week next week. We have a bunch of news to share with you-
most of which we think you will be quite happy about.Thanks again for all of your support of our work- now go enjoy the 777!
-
-
@CFG712
die hier ist das:http://secure.simmarket.com/paolo-ricardo-…(de_7259).phtml
Externer Inhalt www.youtube.comInhalte von externen Seiten werden ohne deine Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklärst du dich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt. -
-
checkt mal eure operation center
ZitatAlles anzeigenPRODUCT: PMDG 777-200LR/F
PMDG 777-300ERVersion: SP1c (v1.10.6155)
Note: Change lists below comprise items tracked within our internal bug monitoring system and do not reflect
new items added to the software or items that were discovered during testing but not logged into the
item tracking system.CHANGE LOG
SP1c (v1.10.6155)
- 0003434: [General - Engines] Low oil level temp issue (emvaos) - resolved.
- 0003362: [FMS/AFDS - LNAV] Extended forced direction DTO handling with A/C off track (emvaos) - resolved.
- 0003426: [General - Engines] Thrust reverser issues (emvaos) - resolved.
- 0003346: [AFDS - Roll Modes] F/D commands shouldn't require pilot input to progress to the full command (emvaos) - resolved.
- 0003412: [AFDS - General] AP engage on ground shouldn't be possible with flaps out of up (emvaos) - resolved.- 0003345: [AFDS - Thrust Modes] Increased rate of throttle lever
movement during flare for immediate reverse thrust at main gear
touchdown (emvaos) - resolved.
- 0003336: [General - Engines] Thrust rises above derate/assumed temp N1 limit during TO roll (emvaos) - resolved.- 0003351: [FMS/AFDS - VNAV] Added custom fuel flow correction model to
account for FSx incomplete drag model (emvaos) - resolved.
- 0003369: [Main Panel - General/Unsure] Reports of sudden failure of both engines during descent (emvaos) - resolved.
- 0003372: [FMS/AFDS - VNAV] ECON Climb Speed schedule updated formula (emvaos) - resolved.
- 0003297: [Systems - Fuel] Fuel remaining with MANUAL fuel entry with non zero fuel used by either engine (emvaos) - resolved.
- 0003350: [External Model - Geometry] Wings missing vortex generators on the outboard flaps? (jbrown) - resolved.- 0003224: [FMS - Performance Pages] FUEL DISAGREE warning on second
leg or after reloading sim with engine turned off (emvaos) - resolved.- 0003349: [FMS - Functionality Problems (General)] Delayed EICAS
advisory FMC MESSAGE after engine start inhibit with scratchpad empty
(emvaos) - resolved.
- 0003356: [FMS - Route/Legs Pages] Double
clicking the RTE page LSK 1L to clear the route shouldn't work in the
air (emvaos) - resolved.
- 0003347: [FMS - Performance Pages] FLXX
altitude entry was accepted as 0 altitude and did not result in INVALID
ENTRY (emvaos) - resolved.
- 0003330: [FMS - Route/Legs Pages] Max
displayed page in LEGS right after swappng routes of unequal length
(emvaos) - resolved.
- 0003348: [External Model - Geometry] 300ER AoA indexer vane geometry positioned wrong (jbrown) - resolved.
- 0003303: [FMS/AFDS - LNAV] Wandering S turns at 8X and 16X with Sp1 (rmaziarz) - closed. -
@CFG712 äh das ist meiner und das Video auch

-
somewhere over Kasachstan
-
Externer Inhalt www.youtube.comInhalte von externen Seiten werden ohne deine Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklärst du dich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.
-
-
-
jetzt springen die display aber nicht mehr an. hmmmm
-
ach bin ich doof, cargo fire war ge'armt
-
Dein Cockpit brennt

Failures im FMC zurücksetzen sollte helfen.
eben nicht, das ist ja auch ausgegangen!
-
Hallo Zusammen, stehe grad in Doha und bekomme dies blöde Message:
EQUIP COOLING
EQUIP COOLING OVDR
nicht weg. Was ist denn da zu tun?und nach einiger Zeit gehen sämtliche Displays aus!
edit: und dieser nervige Sirenenton ist zu hören!
-
Externer Inhalt youtu.beInhalte von externen Seiten werden ohne deine Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklärst du dich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.
-
Na da hab ich wohl jemandem ein Destination Anstoß gegeben.
Prima. Bin dabei -
-
die Herren vom Exeter Airport sind nun einen Schritt weiter und präsentieren ihren nächsten Airport

-