Dein Cockpit brennt
Failures im FMC zurücksetzen sollte helfen.
eben nicht, das ist ja auch ausgegangen!
PMDG Boeing 777-200LR/-300ER
-
- FSX/P3D
- PMDG
-
Maik -
24. März 2012 um 13:19
-
-
- Offizieller Beitrag
Kein Wunder wenn dir gerade deine Avionics Bay abfackelt
-
ach bin ich doof, cargo fire war ge'armt
-
jetzt springen die display aber nicht mehr an. hmmmm
-
Das ist die Frage die ungefähr jeder googled, der die T7 zum ersten Mal in den Sim lädt - wie bekomme ich das FMC zum Laufen (für GPU, Failures, etc.) wenn das Cockpit aus ist
-> langer Druck auf die 'MENU'-Taste. Dann hast du Zugriff auf FS Actions und PMDG Menü.
-
@Speedbird 2652
danke
-
checkt mal eure operation center
ZitatAlles anzeigenPRODUCT: PMDG 777-200LR/F
PMDG 777-300ERVersion: SP1c (v1.10.6155)
Note: Change lists below comprise items tracked within our internal bug monitoring system and do not reflect
new items added to the software or items that were discovered during testing but not logged into the
item tracking system.CHANGE LOG
SP1c (v1.10.6155)
- 0003434: [General - Engines] Low oil level temp issue (emvaos) - resolved.
- 0003362: [FMS/AFDS - LNAV] Extended forced direction DTO handling with A/C off track (emvaos) - resolved.
- 0003426: [General - Engines] Thrust reverser issues (emvaos) - resolved.
- 0003346: [AFDS - Roll Modes] F/D commands shouldn't require pilot input to progress to the full command (emvaos) - resolved.
- 0003412: [AFDS - General] AP engage on ground shouldn't be possible with flaps out of up (emvaos) - resolved.- 0003345: [AFDS - Thrust Modes] Increased rate of throttle lever
movement during flare for immediate reverse thrust at main gear
touchdown (emvaos) - resolved.
- 0003336: [General - Engines] Thrust rises above derate/assumed temp N1 limit during TO roll (emvaos) - resolved.- 0003351: [FMS/AFDS - VNAV] Added custom fuel flow correction model to
account for FSx incomplete drag model (emvaos) - resolved.
- 0003369: [Main Panel - General/Unsure] Reports of sudden failure of both engines during descent (emvaos) - resolved.
- 0003372: [FMS/AFDS - VNAV] ECON Climb Speed schedule updated formula (emvaos) - resolved.
- 0003297: [Systems - Fuel] Fuel remaining with MANUAL fuel entry with non zero fuel used by either engine (emvaos) - resolved.
- 0003350: [External Model - Geometry] Wings missing vortex generators on the outboard flaps? (jbrown) - resolved.- 0003224: [FMS - Performance Pages] FUEL DISAGREE warning on second
leg or after reloading sim with engine turned off (emvaos) - resolved.- 0003349: [FMS - Functionality Problems (General)] Delayed EICAS
advisory FMC MESSAGE after engine start inhibit with scratchpad empty
(emvaos) - resolved.
- 0003356: [FMS - Route/Legs Pages] Double
clicking the RTE page LSK 1L to clear the route shouldn't work in the
air (emvaos) - resolved.
- 0003347: [FMS - Performance Pages] FLXX
altitude entry was accepted as 0 altitude and did not result in INVALID
ENTRY (emvaos) - resolved.
- 0003330: [FMS - Route/Legs Pages] Max
displayed page in LEGS right after swappng routes of unequal length
(emvaos) - resolved.
- 0003348: [External Model - Geometry] 300ER AoA indexer vane geometry positioned wrong (jbrown) - resolved.
- 0003303: [FMS/AFDS - LNAV] Wandering S turns at 8X and 16X with Sp1 (rmaziarz) - closed. -
ZitatAlles anzeigen
Hello PMDG 777 Captains!
Last night we released another Service Pack for the 777 fleet. This
update addresses some items that surfaced with the original SP1 update,
and addresses some other various cleanup items that we wanted to tend to
in the near term with the 777.This update brings some further
refinements to the Autopilot Flight Director System, the Flight
Management System, the Flight Control System, some changes to various
other items that we felt might benefit from a bit of polish. It also
brings further optimizations to the way in which the 777 uses
information from the simulator in order to make it a bit more "bullet
proof" against interference from outside applications.One of the
key pieces (in fact- the primary force behind this update) was the fix
to the "airplane wanders aimlessly during time accelerated flight"
problem that we introduced with the release of SP1. This item took a
monumental effort to resolve- and involved feedback from probably close
to 100 of our customers via this forum and via technical support. I
want to make it a specific point to thank all of you for your feedback
and for your patience while we searched for something that really and
truly defied logic. Many of you allowed us to install instrumented
files onto your sim rigs so that we could collect data- and it was this
cooperation that helped us find and kill this problem.So: Thank you!
Okay- so installation instructions are quite simple:
AUTOMATIC UPDATE VIA THE OPERATIONS CENTER:
===========================================
1) Launch the PMDG OPERATIONS CENTER. (Start/Programs/PMDG Simulations/PMDG Operations Center...)
2) Click the "Please Select a Product" tab and choose the PMDG 777.
3) In the menu tree, click VERSION.
4) Click on the "Download Update" icon for the 200LR/F and the 300ER (if you have that product installed)
5) It will take a few moments to download the update installer to your machine.
6) When the download is complete, double click the download icon and
you will be presented with the contents of the downloaded ZIP file.
Double click the update file you see there, and it will do the rest for
you!7) After the updates are completed, be sure to click on the
wheel/message at the top of the OC and allow it to repair your
aircraft.cfg livery entries.MANUAL INSTALLATION VIA DOWNLOAD:
=================================
1) A bit later tonight we will make the SP1C installers available via our downloads page on the website.
2) Download the update files, but don't run them yet!
3) While your files are downloading, run the PMDG OPERATIONS CENTER.
This will allow the OC to create a current backup snapshot of your
installed liveries and it will save you some heartache later if you have
your own liveries installed that were done by hand.4) Close the Operations Center, then run the SP1C update installers. (Or just the one if you only have the 200LR/F installed)
5) After you have completed the updates, run the PMDG OPERATIONS CENTER
again, and follow the messages at the top to re-apply all of your
liveries.
We hope you have an enjoyable weekend of 777 flying coming up!On a slightly different note- but sure to check in with the forum
during the week next week. We have a bunch of news to share with you-
most of which we think you will be quite happy about.Thanks again for all of your support of our work- now go enjoy the 777!
-
- Offizieller Beitrag
ZitatFS2Crew PMDG 777 Update: I just received the British First Officer voice set and inserted it into FS2Crew 777. Barring any major disaster, I expect to release FS2Crew 777 Saturday around 9am England time.
Your weekend is saved
Your PMDG 777 finally has its crew!
-
- Offizieller Beitrag
Juhu, dann kann ich dich ja endlich auch in der Triple herumkommandieren
-
- Offizieller Beitrag
Nicht nur mit dir, sondern auch mit Matze
-
- Offizieller Beitrag
Den Maik gibt's doch dann eh nur in Emirates-Karren zu hören...
-
Released
direkt mal zugeschlagen -
-
1) We anticipate the PMDG 777-200LR/F for P3D and the PMDG 777-300ER for P3D being released before year end.
2) We are very hard at work on the conversion of this product line to
the new P3D platform, while also evaluating what will be required so
that we can update to x64 when/if Lockheed Martin releases an x64
version of P3D.3) We are not making any functionality changes to the 777. If we
wind up doing so (Because sometime we cannot help ourselves) we will
update both the FSX and P3D platforms with those changes... (But there
won't be any... really... We mean it this time!)4) We anticipate the PMDG 737NGX product line being released for
Prepar3D sometime during 1Q15. It will be a straight port of the
existing version and will not include any major changes/additions from
the existing FSX version. (We will be working on a much larger update
for that product in both the FSX and P3D formats at a later date- but we
haven't scheduled the development resources for this yet... stay tuned
for more information...)5) The PMDG BAe Jetstream 4100 will be available in P3D late in 1Q15 or early 2Q15.
6) The 747-400v2.0 is planned to be available on P3D almost
immediately upon release in FSX. (We are prepping your first preview of
this product... wahoo!) -
Der interessanteste Part aus dem update ist doch der hier...
ZitatThe 747-400v2.0 will be available in the Prepar3D platform, as will a new project that is nearing beta test... (No- I won't tell you what it is!)
-
Eine Frankfurt Scenery bestimmt.....
-
- Offizieller Beitrag
Hihi. Bis wir das sehen fliegen wir P3D v5
-
Könnte mir die 787 vorstellen
-
Wieder was kleineres denk ich mal.